F600
LEAK TEST INSTRUMENT FOR INDUSTRIAL QUALITY CONTROL
ATEQ presents its new entry level leak tester by absolute pressure measurement : F600.
Inside can be found the latest leak testing technics and technology to improve your quality control thanks to its renewed electronic module, measurement module, interface, accessories…
F600 : APPLICATIONS
F600 : FEATURES
- Differential pressure decay leak measurement
- Large range of leak measurement (∆P) F.S.: 20Pa, 50 Pa, 500 Pa or 5000 Pa
- Mechanical or electronic regulator from vacuum to 20 bar
- 128 programs
- Setting on line (via USB)
- 2 languages (English + other one)
- Manual calibration on front panel with calibrated leak
- Data storage on internal memory or USB key
TEST MODES :
- Flow units (sccm, mm3/s, cm3/s, cm3/min, cm3/h…)
- Blockage test
- Sealed components test and others, depending on your applications
ENVIRONMENT :
ROHS standard
FLEXIBLE COMMUNICATION FORMAT :
- RS232: printer, modbus RTU
- Slave USB: PC supervision (WinAteq 300, sesame)
- Master USB: USB key to transfert (parameters, results, …)
- 6 inputs/ 6 outputs 24 V programmable for external automation
- Electronic regulator
Accuracy: linearity + repeatability + hysteresis *Optional laboratory accuracy **Maximum Test Pressure 3 bar
F600 : SPECIFICATIONS
F600 : OPTIONS
- 2 pneumatic outputs for control of sealing connectors
- Small volume
- Small volume / vacuum
F600: TECHNOLOGY
As a stripped down version of the previous technology, standard pressure decay compares the pressure on the part with the atmospheric pressure.
This technology is used when the application does not require a very high accuracy or a very fast cycle time. The method used is based on the measurement of a small variation or drop in pressure with a piezo sensor.
Leak Test & Desensitized Test
The test pressure is applied to the input of the test part 3. The measurement is performed by the pressure sensor 2.
- Device
- Pressure sensor
- Part under test
F600 : DOCUMENTATION
FRENCH
ENGLISH