F28 LP

HIGH SPEED LEAK TESTER FOR INDUSTRIAL QUALITY CONTROL

The F28 LP pressure decay or vaccum decay instrument is the latest addition to ATEQ’s new range : F28.

It’s a high performance, low cost, quality leak tester. Its small packaging enables to mount it near the test part insuring the best measurement conditions. You can easily program and supervise it our super friendly interface: F28 demo.

F28 LP : APPLICATIONS

AUTOMOTIVE
- Air Conditioning
- Radiators
- Exhaust
- Transmission…

EMOBILITY
- Battery Packs
- Pouches & Cells
- Modules
- Housing…

PACKAGINGS
- Aerosol Caps
- Plastic Bags
- Sprays
- Plastic Bottles…

ELECTRONICS
- Hard Disk
- Watches
- TV Screen
- Camera Lenses…

MEDICAL
- Blister Packs
- Fluid Bags
- Filters
- Condoms…

F28 LP: FEATURES

Pressure decay leak measurement: vacuum to 20 bar
Smart pressure regulation without regulator – auto fill (optional)
Electronic regulation (optional)
Units: Pa, Pa/s, sccm
Compact dimensions (overall (mm): h 141.5 x L 225 x D 97)
Mechanical or electronic regulator from vacuum to 10 bar
Integrated fill and dump valves
Ethernet network up to 50 modules (Modbus IP)
DIN rail mounting

ENVIRONMENT :

ROHS standard

MEASUREMENT CHARACTERISTICS :

F28 LP Demo interface

F28 LP : SPECIFICATIONS

PHYSICAL
- Weight : 3.5 Kg
ELECTRICAL SUPPLY
- Voltage : 24 V DC / 1.6 A
- Main adapter (included) : 110 – 230 V AC
TEMPERATURE
- Operating : + 5°C at + 45°C
- Storage : 0°C at + 60°C

AIR SUPPLY
- Test pressure input, need an external regulator
- Clean and dry air
- Air quality standard to be applied (ISO 8573-1)

F28 LP: TECHNOLOGY

As a stripped down version of the previous technology, standard pressure decay compares the pressure on the part with the atmospheric pressure.

This technology is used when the application does not require a very high accuracy or a very fast cycle time. The method used is based on the measurement of a small variation or drop in pressure with a piezo sensor.

Leak Test & Desensitized Test

The test pressure is applied to the input of the test part 3. The measurement is performed by the pressure sensor 2.